Zadig Driver Reset (Windows Only)

When flashing programs over USB on Windows, it may occasionally be necessary to reset your USB driver to the correct setting.

You can use the free program Zadig to accomplish this process.

  • To begin, download Zadig here. Use the most recent version.

  • Launch Zadig

  • Put Daisy into bootloader mode by following these steps. With Daisy connected to your computer via its onboard USB, hold down the BOOT button and press the RESET button. After releasing the RESET button, you can release the BOOT button as well.

  • Click the “Options” menu in Zadig and select "List All Devices”.

zadig-1

  • In the dropdown menu inside the main window, select "DFU in FS mode," followed by selecting "WinUSB" in the target driver box.

Note: Do not worry if the box on the left displays "(NONE)" instead of "libusb0" like in the following screenshot.

zadig-2

  • Click "Replace Driver". Zadig will update to the appropriate driver to flash Daisy.